kai_logo

B2B

KAI produces the dual-core blade of the Shun Nagare Series in an innovative forging process. Here, two types of steel with different properties are combined to form a 72-layered piece of Damascus steel. The combination of flexible and robust VG 2 steel and an especially hard VG 10 steel results in a hardness of 61 (±1) HRC. As a result, the double-edged blades have a particularly long-lasting edge retention, and excellent sharpness.

The ergonomically shaped handle sits comfortably in the hand thanks to its soft, rounded lines. The forged tang in the handle gives the knife massive stability and balances the knife perfectly as a counterweight to the blade. The riveted handle scales made of grey-black mottled pakkawood, an impregnated and particularly resistant wood veneer, lend the knife warmth and value.

Shun Nagare

Slicing knife

NDC-0704

Filters Sort results
Reset Apply
Paring knife | NDC-0700
Utility knife | NDC-0701
Santoku | NDC-0702
Slicing knife | NDC-0704
Bread knife | NDC-0705
Chef's knife | NDC-0706

Blade 9" (23 cm),
Handle 14 cm

EUR 375,00

Recommended retail price
of the producer

Product information

Type: Slicing knife
Series: Shun Nagare
Article no: NDC-0704

Blade: Length 23 cm
Edge: Double-sided
Handle: Length 14 cm

Handle material: Pakka wood, grey-black

Weight: 208 g

Production: Handmade
Rockwell hardness: 61 (±1) HRC
EAN 4901601006421
Category: High End Series

Questions about the product?
Contact us!

Note: Due to the change in the logo marking process in 2024, the lettering under the black Shun logo will be successively changed from gold to platinum in the future.
Type: Slicing knife
Series: Shun Nagare
Article no: NDC-0704

Blade: Length 23 cm
Edge: Double-sided
Handle: Length 14 cm

Handle material: Pakka wood, grey-black

Weight: 208 g

Production: Handmade
Rockwell hardness: 61 (±1) HRC
EAN 4901601006421
Category: High End Series

Questions about the product?
Contact us!

Note: Due to the change in the logo marking process in 2024, the lettering under the black Shun logo will be successively changed from gold to platinum in the future.
Cleaning

Rinse the knives in hot water before using them for the first time. After each use, make sure that the knives are washed without delay (with a mild detergen) and dried off with a soft cloth. Acidic foods in particular should be rinsed off immediately after use.

For your own safety, you should always wipe the knife away from your body and away from the cutting edge with a cloth or towel.

Knives do not belong in the dishwasher, under any circumstances. Always wash the knives by hand in order to protect the material and maintain long-lasting sharpness.
Sharpening & Care

Ensure that all knives with natural wooden handles do not remain in water too long. Oil the handle from time to time with a little neutral vegetable or camellia oil.

It is also advisable to have the knives professionally resharpened from time to time to repair signs of wear on the cutting edge and to ensure lasting sharpness.

Due to the high degree of hardness of our knives, sharpening steels are completely unsuitable. From the traditional whetstone to a complete electric system, our range offers the right tool for each of our knives.

For the professional handling of our grinding range we inform you here.
Storing

When storing the knives, make sure that the blade does not come into contact with other metallic objects. This way, common causes of damage and staining can be avoided.

The best way to store the knives is in a knife block, in a wooden drawer insert, on a wooden magnetic knife rack, or in the drawer with a blade guard or sheath.
We are proud to guarantee that each Shun cooking knife manufactured in Japan leaves our factory in absolute faultless condition.

In case a product shows any faults in original material, construction, or workmanship it will either be replaced or repaired at no cost within a 10 years period of time. Normal wear and mistreatment are excluded from this warranty.

Our warranty only applies to products purchased from authorized KAI sales partners.
This guarantee does not restrict the consumer‘s statutory warranty rights. The guarantee is given by KAI Europe GmbH, Kottendorfer Str. 5, 42697 Solingen and only applies to the EU.

The assertion of the guarantee is free of charge for the customer. During the warranty period, the consumer has at least one claim against KAI Europe GmbH for supplementary performance in accordance with Section 439 Paragraphs 2, 3, 5 and 6 Clause 2 and Section 475 Paragraph 3 Clause 1 and Clause 5 of the German Civil Code (BGB).
The effectiveness of the guarantee obligation is not affected by the fact that one of the above requirements is not met.

Slicing knife

Slicing knife

Made in Japan

VG MAX steel with a hardness of 61 (±1) HRC forms the entire blade's core right up to its edge. Sheathed in 32 layers of Damascus steel, the knife embodies a peerless anatomy paired with a resilient blade that is both hard and flexible at once due to its hybrid composition. The Shun Classic blades have a double-sided edge.

The slim handle made of durable pakkawood is fashioned in a traditional Japanese chestnut shape. High quality resins added to the wood make the material particularly resilient and resistant to moisture. Its typical chestnut shape ensures a comfortable and secure grip whilst cutting, thanks to a small rim on its right side. The integrated tang boosts stability and balance.

Shun Nagare

Slicing knife

NDC-0704

Filters Sort results
Reset Apply
Paring knife | DM-0700
Utility knife | DM-0701
Santoku | DM-0702
Carving knife | DM-0703
Slicing knife | DM-0704
Bread knife | DM-0705
Chef's knife | DM-0706
Chef's knife | DM-0707
Carving fork | DM-0709
Boning knife | DM-0710
Steak knife | DM-0711
Vegetable knife | DM-0714
Peeling knife | DM-0715
Utility knife | DM-0716
Wide Santoku | DM-0717
12
Blade 9" (23 cm),
Handle 14 cm

EUR 375,00

Recommended retail price
for Germany

Related products

Recommendations

Do you already know
our whetstone range?

Knives are put under a lot of strain in continuous daily use and even the best blade loses its sharpness over time.

KAI offers a wide range of sharpening and care products to give knives the optimum finish for a maximally sharp blade over many years: From ceramic-bonded whetstones for the traditional Japanese and professional way of sharpening to diamond and ceramic sharpeners to sophisticated blade care and more.

Can’t get enough?

Get notified about new products arrivals and early release info.

You may unsubscribe from our list at any time. Visit our Privacy Policy for more information.

Price
Preis - slider
4,001.100,00
Blade types
Blade types
Price
Preis - slider
4,001.100,00
Blade length
Klingenlänge - slider
5,0 cm30,0 cm